Author Topic: 360 precisions  (Read 459 times)

Offline Matthew Wang

  • Total Awesome
  • Hirundo Rustica
  • *****
  • Posts: 1544
  • Karma: +70/-26
  • July 1st, 2008 - When it all began.
    • View Profile
360 precisions
« on: November 20, 2009, 02:30:00 PM »
Hey guys,

Recently I started playing around with the idea of them, since they looked challenging. And in fact, they are. Right now I'm trying to jump simply from one line to another line, about a 5 foot jump.

And well, the 360 part is what really gets me. It totally ruins my direction towards the second line and the amount of power I put into the jump.

So how do I go about conquering these beastly things? Any tips, or tricks to get them down?
http://www.washingtonparkour.com/
Need something Washington Parkour related?
matt@washingtonparkour.com
washington@americanparkour.com
10 PUSH UPS OR 5 PULL UPS PER POST

turtlekarma

  • Guest
Re: 360 precisions
« Reply #1 on: November 20, 2009, 04:55:19 PM »
I've been training these as well... not for rails specifically, but I hope to get there eventually.  The first thing that I wanted to get down was the issue of going a little to left every time I jumped, cause when I twist in the air it used to rotates my body so much that I ended up going diagonal instead of straight forward.  I eventually corrected this issue by just playing with how much twist comes from my upper body and lower body.  That eventually got me going straight forward and landing where I wanted too.  7ft is currently my comfort zone going from one object to another...I have yet to try it out on the concrete, but I've been doing them successfully in the gym on foam blocks. 

My main issue right now is a mental one, cause as you know you can't spot your landing until you're right on the thing you're jumping to.  still working on that, where are you in your progression right now?  Lets compare notes ;D

Offline Matthew Wang

  • Total Awesome
  • Hirundo Rustica
  • *****
  • Posts: 1544
  • Karma: +70/-26
  • July 1st, 2008 - When it all began.
    • View Profile
Re: 360 precisions
« Reply #2 on: November 20, 2009, 06:14:16 PM »
Well, I played around with it a bit more today and realized that I need to bring my knees to my chest just like in a normal precision. It's hard to do while spinning around in the air :P

Bringing in those knees help with the rotation and distance. I still can't aim properly though or give the required forced to land on the second line. I'm always short by about a foot.
http://www.washingtonparkour.com/
Need something Washington Parkour related?
matt@washingtonparkour.com
washington@americanparkour.com
10 PUSH UPS OR 5 PULL UPS PER POST

Offline Caleb M. Iuliano

  • Mangabey
  • ****
  • Posts: 258
  • Karma: +6/-0
    • View Profile
    • My Youtube
Re: 360 precisions
« Reply #3 on: November 20, 2009, 10:05:32 PM »
If your traveling left or right during your spin it might be because you are spinning off the ground. If you start to twist before your jump you will travel diagonally. So if your twisting right you will probably travel left, and if you twist left you will probably travel right. If you wait to leave the ground before you twist it may help you travel in a straight line
youtube.com/JCalebM
facebook.com/FloridaParkour

Offline SomaPK

  • Oryctolagus Cuniculus
  • *
  • Posts: 49
  • Karma: +0/-1
    • View Profile
Re: 360 precisions
« Reply #4 on: November 22, 2009, 12:11:22 PM »
360 precisions are not that hard. ;) Just takes time to get used to it.Personally i'm very close to 8ft 360s and hopefully will get it in a month or so.